PostID: 3974
Cesar
|
Posted: Sun 2/5/2012 00:10:38
Re: PostID[3968]
----------------------------------------------------------
Hello,
Yes, the siren sound by itself randomly. Don't know outdoor sirem because I don't have install it yet because is broken and I am waiting to receive from you a broken circuit.
When the indoor alarm sound the alarm don't do anything, so I have crystal clear that the problem is in the indoor alarm unit because the alarm don't call me or send an SMS like in the normal procedure.
I already have tried to reconfigure, without success. The indoor alarm continues hooting from time to time (maybe one time every two or three days).
Regards
César
Join this topic | Reply to this message | Back to top |
PostID: 3972
|
Posted: Sat 2/4/2012 18:22:20
----------------------------------------------------------
Hello,
For edit the zone alarm 8 for exemple what is the command ? I do not understand the manual.
It's by sms 123456#84#my text#8
or 123456#84#my text#,8
or 123456#84#my text#,8#
or ....
Thanks for your response
Join this topic | Reply to this message | Back to top |
PostID: 3968
webmaster
|
Posted: Tue 1/31/2012 16:36:32
Re: PostID[3966]
----------------------------------------------------------
Hi, do you mean your indoor siren sound by itself randomly? Not outdoor siren?
When the indoor siren sound, does the alarm do anything at all? Or just the siren is hooting by itself?
After you power on the indoor siren, please try to press the little black learn button for more than 10 seconds and then release. It should erase the memory of the indoor siren, then try to program the indoor siren to the system again following the user manual.
Join this topic | Reply to this message | Back to top |
PostID: 3966
cesar
|
Posted: Mon 1/30/2012 17:28:59
Re: PostID[3924]
----------------------------------------------------------
Hello, same problem here. Siren (indoor) sound by itself. Would appreciate any help.
Regard
Join this topic | Reply to this message | Back to top |
PostID: 3924
Kostas Georgopoulos
|
Posted: Thu 1/5/2012 03:32:20
----------------------------------------------------------
Thank you very much for your help and for the very good aftersale you offer
the problem with the alarm siren that sound from time to time solved permantly!
thank you again.
Join this topic | Reply to this message | Back to top |
PostID: 3901
webmaster
|
Posted: Wed 12/28/2011 18:34:51
Re: PostID[3898]
----------------------------------------------------------
You hear noise from the PIR sensor? What kind of noise is that? If possible, please record a video including the PIR noise and email to sales@novibo.com to us.
Join this topic | Reply to this message | Back to top |
PostID: 3900
webmaster
|
Posted: Wed 12/28/2011 18:33:54
Re: PostID[3897]
----------------------------------------------------------
Hi,
Could you please take a picture of the sms message you get on your mobile phone, and email to sales@novibo.com to us?
Join this topic | Reply to this message | Back to top |
PostID: 3898
eric
|
Posted: Tue 12/27/2011 13:09:14
----------------------------------------------------------
One of the motion sensors make noise when i walk near it. The noise is coming from the actual motion sensor NOT from the security unit. Does this mean the battery power is low?
Join this topic | Reply to this message | Back to top |
PostID: 3897
eric
|
Posted: Tue 12/27/2011 13:06:04
----------------------------------------------------------
i keep getting SMS messages that say "Power Changer Off" then "Power Changer On". What is a power changer?
Join this topic | Reply to this message | Back to top |
PostID: 3874
webmaster
|
Posted: Fri 12/2/2011 16:57:15
Re: PostID[3873]
----------------------------------------------------------
Please send us the video please. We can check it for you. If the file is too large, you can upload the video to youtube and send us the link. You can also remove the smoke detector cover and take a picture of the circuit board and email to us.
Join this topic | Reply to this message | Back to top |
PostID: 3873
Aristos Anastasiou
|
Posted: Thu 12/1/2011 23:49:03
----------------------------------------------------------
Dear Sirs
I am having a problem with the wirelss smoke detector.
It doesnt have an internal antenna wire( as i saw from my other sets), and its not working.
I press the test button and nothing happens, I cant programm it to my main unit.
Can you please advise?
I have taken a video and if you like i can send it to you.
Regards,
Aristos
Join this topic | Reply to this message | Back to top |
PostID: 3864
webmaster
|
Posted: Tue 11/22/2011 16:25:48
Re: PostID[3863]
----------------------------------------------------------
Are you sure your SIM card supports MMS function? Some SIM card doesn't have this function.
Also, do you have another SIM card from different SIM card provider and try it with the alarm system? No need to delete anything inside the card, just try it on the alarm system.
Join this topic | Reply to this message | Back to top |
PostID: 3863
Daniel
|
Posted: Mon 11/21/2011 12:07:13
----------------------------------------------------------
Sensors are OK. SMS works OK. But having a problem with MMS sending. Can you please help?
We use VirginMobile in Australia. And we have inputted the following APN details correctly.
APN: VirginMMS
User:
Pass:
IP: 202.139.83.152
Port: 9201 (we also tried 8070)
Home: http://mms.virginvibe.com.au:8002/
(I received those details from Virgin site)
But when I send the command: 123456#2#1#
We just get the status response message and no MMS image. Please help.
Thanks!
Daniel
Join this topic | Reply to this message | Back to top |
PostID: 3847
webmaster
|
Posted: Tue 11/8/2011 16:07:39
Re: PostID[3844]
----------------------------------------------------------
Which port did you connect the phone line to? Please make sure you connect the phone line to the "Line" port.
Also, is the phone line for the alarm system shared with other devices? If yes, please try to connect the landline only to the alarm system. Also, if you have another telephone cord, please try with another cord as well.
Join this topic | Reply to this message | Back to top |
PostID: 3844
Hervé Huttmann
|
Posted: Mon 11/7/2011 20:37:12
----------------------------------------------------------
The unit dials without problem.
But whatever tne number of ring times set (with the *5* function) it never picks up incoming calls.
I guess something is missing in the manual to activate communication over the phone ?
Thanks
Join this topic | Reply to this message | Back to top |
PostID: 3831
webmaster
|
Posted: Wed 11/2/2011 17:26:14
Re: PostID[3687]
----------------------------------------------------------
Please let us have your order ID so we can look up to your record, please send the order number to sales@novibo.com and we will help you there.
Join this topic | Reply to this message | Back to top |
PostID: 3830
webmaster
|
Posted: Wed 11/2/2011 12:23:58
Re: PostID[3829]
----------------------------------------------------------
GL8088 cannot work with wired sensor.
Join this topic | Reply to this message | Back to top |
PostID: 3829
Carlos Oliveira
|
Posted: Tue 11/1/2011 20:41:05
----------------------------------------------------------
Hello,
Can GL8088 work with a wired siren?
Thank you.
Join this topic | Reply to this message | Back to top |
PostID: 3787
David Chapman
|
Posted: Sat 10/29/2011 07:13:58
Re: PostID[3379]
----------------------------------------------------------
not sure if you got this sorted but with my unit slightly flat batteries were the cause.
Join this topic | Reply to this message | Back to top |
PostID: 3760
webmaster
|
Posted: Tue 10/25/2011 11:17:11
Re: PostID[3759]
----------------------------------------------------------
The siren for LL7088 (SB-103HKJ) and for GL8088/ LL8088 (SB-103HK) is not the same.
They cannot be worked with each other system.
Join this topic | Reply to this message | Back to top |
PostID: 3759
Carlos Oliveira
|
Posted: Tue 10/25/2011 07:27:12
Re: PostID[3672]
----------------------------------------------------------
I have both 8088 gsm alarm with SB-103W indoor siren and 7088 landline alarm with SB-103HKJ outdoor siren.
If I change the frequency module of indoor siren to the outdoor siren, does the SB-103HKJ outdoor siren work with 8088 alarm?
If not, what changes are needed?
Thank you.
Join this topic | Reply to this message | Back to top |
PostID: 3738
webmaster
|
Posted: Mon 10/17/2011 11:04:23
Re: PostID[3737]
----------------------------------------------------------
please see email reply to resolve this issue. We will change the part not working with you.
Join this topic | Reply to this message | Back to top |
PostID: 3737
Kostas Georgopoulos
|
Posted: Sun 10/16/2011 06:39:37
----------------------------------------------------------
i have the same problem with the LL8088d system
Join this topic | Reply to this message | Back to top |
PostID: 3687
Pascual Asensi
|
Posted: Tue 10/11/2011 07:16:01
----------------------------------------------------------
I have TA alarm but only trigger when i put the sx1 or door unit next to central unit ( 1 to 5 cm. Range ). The bateries are new , but the TA dont recive signal. The sensors are matched whit the central unit. The remote control need more than 3 or 4 press botton to arm or dissarm . I need a solution , and/or explication. Thank you.
Join this topic | Reply to this message | Back to top |
PostID: 3680
webmaster
|
Posted: Thu 10/6/2011 12:22:05
Re: PostID[3679]
----------------------------------------------------------
Password emailed to you, please check.
Join this topic | Reply to this message | Back to top |
PostID: 3679
Steve Cerone
|
Posted: Wed 10/5/2011 10:20:48
Re: PostID[3554]
----------------------------------------------------------
I also have the asg2008g-16 Unit and do not have the password to set phone numbers and program unit. Please help me???
Join this topic | Reply to this message | Back to top |
PostID: 3675
webmaster
|
Posted: Wed 9/28/2011 14:13:11
Re: PostID[3673]
----------------------------------------------------------
Seems like the last 4-row jumpers below the 8-bit address jumpers are not correct.
Please email to us (sales@novibo.com) about how you want to setup the zones. For example:
Zone 1: Remote1
Zone 2: Remote2
Zone 3: PIR1
Zone4: Door Sensor1
......
......
Zone13: PIR10
Then we can send you some procedures to do the setup. Then it should help you to solve your problem.
Join this topic | Reply to this message | Back to top |
PostID: 3673
Stiliyan Velchev
|
Posted: Tue 9/27/2011 14:41:29
Re: PostID[3664]
----------------------------------------------------------
Hi,
Problem is that when I change jumpers ID the result is 4 fast beeps from the alarm and sensor not activating the alarm. How to solve this?
Model SX X10.
10 door sensors + 3 Pir sensors.
How to make each sensor assigned to different zone. So I need 13 sensors assigned to 13 zones.
The alarm will send sms "wireless activated 1 to 13". Is this correct?
Regards
Topic follows as:
PostID: 3594
PostID: 3595
PostID: 3625
PostID: 3626
PostID: 3628
PostID: 3631
PostID: 3663
PostID: 3664
Join this topic | Reply to this message | Back to top |
PostID: 3672
webmaster
|
Posted: Tue 9/27/2011 12:04:33
Re: PostID[3668]
----------------------------------------------------------
No, siren model SB-103HKJ is for alarm model SB-LL7088 only.
Join this topic | Reply to this message | Back to top |
PostID: 3668
Carlos Oliveira
|
Posted: Tue 9/27/2011 07:13:12
----------------------------------------------------------
Hello,
Is it possible to use SB-103HKJ outdoor siren with GL8088A alarm set, instead of SB-103HK?
Thank you.
Join this topic | Reply to this message | Back to top |
PostID: 3664
webmaster
|
Posted: Wed 9/21/2011 17:37:49
Re: PostID[3663]
----------------------------------------------------------
Please be careful that you can only set the 8-rows jumper, but not the 4 rows below. That should be fixed to what we have set for you.
Join this topic | Reply to this message | Back to top |
PostID: 3663
webmaster
|
Posted: Wed 9/21/2011 17:36:37
Re: PostID[3662]
----------------------------------------------------------
Hi, you have a wrong idea about the jumper setting. There is no "particular' jumper setting for each sensor.
For the 8 rows address jumper, you can set whatever you like, then when you add that sensor to the system, the system will automatically assign a zone to that sensor.
So, the first sensor will be assigned to zone 1. Then if you want to group any other sensor to zone 1, you have to set the same jumper setting as the first sensor.
Then you can set a different 8-bit setting for another sensor and add it to the system. The system will assign it to zone 2. If you want to group other sensors to zone 2, then you have to have the same 8-bit jumper setting.
Similar procedures for zone 3-16.
Join this topic | Reply to this message | Back to top |
PostID: 3662
Stiliyan Velchev
|
Posted: Wed 9/21/2011 04:38:16
Re: PostID[3631]
----------------------------------------------------------
Hi,
You send me twise jumper explanation - how jumpers are working.
Please send me full jumper setting for sensors.
8 rows in 3 columns which jumper is what ID?
The shematic - diagram of jumpers with ID asosiation is what I need. I purchased Model SX X10.
Topic follows as:
PostID: 3594
PostID: 3595
PostID: 3625
PostID: 3626
PostID: 3628
Join this topic | Reply to this message | Back to top |
PostID: 3660
webmaster
|
Posted: Mon 9/19/2011 17:31:18
Re: PostID[3658]
----------------------------------------------------------
Hi,
Could you please take a video to demonstrate the problem so that we can pass it to the manufacturer as well? You can email to sales@novibo.com, or post it on you tube and send us the you tube link.
Also, for the backup battery, may be the factory has installed a wrong type of button. Please try to use a tape or some tool to press the backup battery button (small red) and the battery should work.
Join this topic | Reply to this message | Back to top |
PostID: 3659
webmaster
|
Posted: Mon 9/19/2011 14:31:40
Re: PostID[3654]
----------------------------------------------------------
please see our email reply.
Join this topic | Reply to this message | Back to top |
PostID: 3658
michalis
|
Posted: Sun 9/18/2011 23:40:25
Re: PostID[3652]
----------------------------------------------------------
1. the tamper switch is pressed fully
2. I turned everything off (alarm unit, indoor siren, motion sensors, door sensors) with the same result. Siren goes on by its self.
3. Qwestion. When the big red button not pressed, if the alarm goes on, when I cut he power the siren goes off. That means that the battery is not working. What is the point of having a battery in the siren if when you cut the power the siren stops making noice? Is this normal???
4. I tried to test the siren with the big red button pressed. I get the same result. The siren goes on by its self, but if you cut the power the battery is working.
I hope I helped you and you can understand what is wrong.
Thank you for your responses!!!
Join this topic | Reply to this message | Back to top |
PostID: 3654
Alkiviadis Koumaros
|
Posted: Sat 9/17/2011 01:33:40
----------------------------------------------------------
Hello. I just received the secBo GL8088A system I ordered from Novibo.
Well, I have serious problem with the PIR sensors, model SB-80. The sensors when turned ON, they detect movement every 5 seconds all the time!
I already had an alarm system and I want to replace it with the GL8088. The PIR sensors were placed to the exact place I had the previous ones, so the problem is not with the place I installed them.
In the PIR's sensor manual it says that the sensor needs 30 seconds to initialise. Unfortunately the sensors all the time detect movement every 5 seconds. I even covered the sensors to see what would happen and again the blue LED turns ON every 5 seconds.
I kindly ask for your technical support.
Join this topic | Reply to this message | Back to top |
PostID: 3652
webmaster
|
Posted: Fri 9/16/2011 17:19:48
Re: PostID[3642]
----------------------------------------------------------
Is it possible that the tamper switch is not pressed fully onto the wall and cause the triggering?
Please also try to turn off ALL the wireless sensors to see if the problem stops, if so, then we think there is an error of setup in the siren.
Join this topic | Reply to this message | Back to top |
PostID: 3642
michalis
|
Posted: Thu 9/15/2011 21:07:54
Re: PostID[3641]
----------------------------------------------------------
Hi, Im afraid that didn't work either...
My guess is that the siren goes on when the battery is fully charged. Do you see any connection?
Join this topic | Reply to this message | Back to top |
PostID: 3641
webmaster
|
Posted: Thu 9/15/2011 18:31:24
Re: PostID[3638]
----------------------------------------------------------
Hi, let's try to reset the siren (erase siren memory) by doing this:
1. Power on the siren
2. Press and hold the Learn button (red smaller button) for at least 10 seconds and the siren LED should flash once. It means memory is erased.
Now siren should not respond to the alarm main unit. You can leave the siren and see if it still rings randomly.
Join this topic | Reply to this message | Back to top |
PostID: 3638
michalis
|
Posted: Thu 9/15/2011 02:51:07
Re: PostID[3630]
----------------------------------------------------------
I checked both buttons and made sure they are ok. But I have the same result. The siren sounds a few hours after I connect it with power, even with the alarm system turned off.
So everytime I conect the outdoor siren with power a few hours later (sometimes 14 hours, sometimes 3 hours) the siren bips every few seconds and a minute later it goes on without stopping. The only way to stop it is to cut off the power. All these with the alarm system either disarmed or off. Any suggestions?
Join this topic | Reply to this message | Back to top |
PostID: 3633
Trifon
|
Posted: Mon 9/12/2011 17:31:05
----------------------------------------------------------
Hi,
can you please send me the latest version to me too :)
now I have
IP WiFi Cam
Device Embeded Web UI Version 0.2.2.39
Device Firmware Version 20.37.2.36
Thank You!
Join this topic | Reply to this message | Back to top |
PostID: 3631
webmaster
|
Posted: Mon 9/12/2011 10:16:45
Re: PostID[3628]
----------------------------------------------------------
Instructions are sent to your email, please check.
Join this topic | Reply to this message | Back to top |
PostID: 3630
webmaster
|
Posted: Mon 9/12/2011 10:08:34
Re: PostID[3629]
----------------------------------------------------------
Hi, 2 things may make the siren sound. 1st is the test button, there is a red button (bigger one) at the bottom of the siren, please make sure nothing is press/touching that button. 2nd is the tamper switch, please make sure the tamper switch is tigtly pressed against the flat surface you install the siren on.
If you turn off the alarm system and just power on the siren, would the siren give out sound?
Join this topic | Reply to this message | Back to top |
PostID: 3629
michalis
|
Posted: Sun 9/11/2011 14:04:42
----------------------------------------------------------
Just yestarday I installed my new novibo gl8088d and everything worked fine.
Now with the alarm disarmed, the outdoor siren started to bip every few seconds and some minutes later it went on. I pressed the disarm button on the remote, I disarmed the alarm on the alarm host (it was disarmed anyway) but the siren was still on. When I cut the power to the siren then it finanly went off. Now every time I put the power back on the outdoor siren goes on again. What shall I do??
Join this topic | Reply to this message | Back to top |
PostID: 3628
Stiliyan Velchev
|
Posted: Fri 9/9/2011 19:36:15
Re: PostID[3626]
----------------------------------------------------------
Hi,
I purchased Model SX X10.
Topic follows as:
PostID: 3594
PostID: 3595
PostID: 3625
PostID: 3626
Join this topic | Reply to this message | Back to top |
PostID: 3626
webmaster
|
Posted: Fri 9/9/2011 18:18:16
Re: PostID[3625]
----------------------------------------------------------
Hi, you cannot randomly change the jumper settings of the sensors! Please let us know what alarm model you have and we can email you instructions on jumper settings.
Join this topic | Reply to this message | Back to top |
PostID: 3625
Stiliyan Velchev
|
Posted: Thu 9/8/2011 16:58:30
Re: PostID[3595]
----------------------------------------------------------
Hi,
Please send me full jumper setting for sensors.
8 rows in 3 columns which jumper is what ID?
When I change randomly jumpers ID the result is 4 fast beeps from the alarm and sensor not activating the alarm.
Join this topic | Reply to this message | Back to top |
PostID: 3621
webmaster
|
Posted: Tue 9/6/2011 09:47:11
Re: PostID[3614]
----------------------------------------------------------
Please note that the TX alarm doesn't have entry delay. Once the sensor is triggered, the alarm will set off immediately.
You can disarm the system by remotes, wireless keypad (optional item), phone call, or SMS.
Join this topic | Reply to this message | Back to top |
PostID: 3614
miguel angel jacob gomez
|
Posted: Sat 9/3/2011 16:23:09
Re: PostID[3613]
----------------------------------------------------------
sorry I forget it.
The model of this alarma system is TX
Join this topic | Reply to this message | Back to top |
